What matters
- kWh/100 mi is an energy-consumption rate, not battery capacity or charging power.
- Cost per mile needs energy and price at a consistent charging boundary.
- Actual cost can include time-of-use energy, public-session or parking fees, subscriptions, and allocation of fixed charges—not only a headline $/kWh.
Why this question matters
Electrified vehicles add battery state, thermal management, power electronics, charging, and blended propulsion to familiar vehicle measurements. The database should explain those layers without treating every hybrid or EV alike.
What the evidence supports
EPA identifies kWh/100 mi as a consumption metric that relates directly to electricity use and cost, and its label metric represents outlet electricity including wall-to-vehicle charging losses. DOE documents that charging prices and incentives vary with location and time, while network business models can bill per energy, time, or session. For an owner’s realized cost, metered input energy and the actual tariff or receipt are the strongest boundary match.
Keep energy, power, and capacity in separate columns
A kilowatt-hour is energy. A kilowatt is the rate at which energy is transferred. A battery described as 75 kWh is a storage-capacity figure; a charger delivering 7.2 kW is a power figure; a vehicle rated at 28 kWh/100 mi is a travel-consumption figure. None can be substituted directly for another without time or distance.
EPA’s label consumption metric is designed as a standardized vehicle comparison and includes outlet energy and wall-to-vehicle charging losses. That makes label kWh/100 mi compatible with an energy price for a planning comparison. Real use still changes with temperature, speed, HVAC, battery conditioning, terrain, payload, tires, and charging behavior, so replace the label value with a measured long-period wall-energy rate when estimating your actual bill.
Match the price to where and when charging occurred
For a flat volumetric rate, multiply metered kWh by the applicable dollars per kWh. For time-of-use charging, split energy into the correct rate windows before summing cost. DOE notes that rates may vary by time and location and may cover the whole home or an EV-only submeter. Use the marginal bill components that actually change with charging; do not divide the entire household bill by household kWh and assume every fixed charge was caused by the vehicle.
Public charging can add per-session, per-minute, idle, parking, tax, or membership charges. Assign those charges to the miles supported by the applicable sessions, and compare membership scenarios including the subscription itself. A free workplace session has zero direct driver energy price but is not zero energy use; state whether the calculation is personal out-of-pocket cost, site cost, or total energy cost.
Build a mixed-charging ledger instead of one national rate
Record charging-location category, start time, metered energy, total receipt, and odometer or trip distance. Sum home, workplace, and public energy and charges over the same distance window. The realized cost per mile is total attributable charging cost divided by miles traveled; the realized wall consumption is total metered charging kWh divided by miles, multiplied by 100.
State how beginning and ending battery state were handled. A short period that starts full and ends nearly empty contains vehicle energy that was purchased before the window; the reverse can overstate current-period energy. Longer periods or matched state-of-charge endpoints reduce this inventory effect. For a PHEV, track electricity and liquid fuel separately before adding costs, because blended operation cannot be described by electricity alone.
Using an illustrative billed-energy consumption of 28 kWh/100 mi, a hypothetical $0.16/kWh rate gives 4.48¢/mile; a hypothetical $0.48/kWh rate gives 13.44¢/mile before additional fees. These are comparison assumptions, not current tariffs. Use consumption measured at the same boundary as the bill: a dashboard battery-side value is not interchangeable with metered input energy. EPA label consumption already includes AC charging losses, so do not add that loss allowance twice or assume identical losses for DC charging.
Illustrative example, not a measured vehicle test.
A repeatable workflow
- Choose the question and energy boundary: EPA planning, charger receipt, or metered realized ownership cost.
- Record distance, matched battery-state endpoints where practical, and metered energy by location and rate window.
- Apply the actual volumetric rates, taxes, session, time, parking, idle, and subscription charges that belong to those sessions.
- Sum energy and attributable cost across the same distance, then report wall kWh/100 mi and cost per mile with assumptions.
Where the shortcut breaks
This calculates charging energy cost, not total ownership cost or lifecycle emissions. Weather, speed, HVAC, battery conditioning, standby use, charging level and efficiency, terrain, tires, load, tariff design, incentives, and fees can all change the result.
Sources and update method
TunerBench prefers government, standards-body, and component-manufacturer documentation. This guide is reviewed against the sources below and should be revisited when regulations, product data, or vehicle technology changes.
- U.S. EPA: electric-vehicle label, kWh per 100 miles, and cost assumptions
- U.S. EPA 2024 Automotive Trends Report: outlet electricity and wall-to-vehicle charging losses
- U.S. EPA: fuel economy testing and AC charging-loss measurement
- U.S. DOE AFDC: charging fees and pricing structures
- U.S. Department of Energy: Vehicles-to-Grid Integration Assessment and charging-rate structures
- U.S. Department of Energy AFDC: how all-electric cars work