What matters
- A CARB aftermarket-parts Executive Order exempts the named device from California’s anti-tampering prohibition only for the parts, vehicles, and conditions written into that order.
- An EO number, brand logo, or “CARB compliant” product-family claim is not evidence that a different part number, calibration, model year, or combined setup is covered.
- An aftermarket EO is not a performance, durability, safety, warranty, or emissions-reduction endorsement, and other federal, state, inspection, and installation requirements remain separate.
Why this question matters
Performance content must distinguish engineering calculation from emissions and legal compliance. Federal rules, state requirements, manufacturer warranties, and competition policies are different layers and change over time.
What the evidence supports
CARB says an add-on or modified part receives a Vehicle Code section 27156 exemption after an engineering evaluation supports that it will not increase vehicle emissions; the resulting EO allows installation on specific emissions-controlled vehicles. CARB also warns that an EO applies to a specific program rather than every use. EPA’s enforcement policy recognizes an applicable CARB EO as one possible documented reasonable basis, but only when the installation is within the EO’s coverage and conditions.
Start with the exemption—not the sticker
California Vehicle Code section 27156 restricts emissions-related add-on and modified parts. CARB’s aftermarket program evaluates a manufacturer’s application and, when the submitted evidence supports no increase in vehicle emissions, issues an Executive Order exempting the described device from that anti-tampering prohibition. The EO is the operative document. A catalog icon, reseller checkbox, packaging claim, or copied EO number is only a lead until it matches the current order.
CARB assigns different EO series to different mobile-source programs. For aftermarket performance and add-on parts, a D-prefix number commonly leads to the relevant order, but the prefix is not a universal approval symbol. CARB’s own buyer guidance says each EO is approval for a specific program. An aftermarket-parts exemption is not the same as verification that a device reduces emissions, certification of an entire vehicle, or approval under every other regulation.
Match every application boundary in the order
Open the EO from CARB’s database and identify the manufacturer, device name, covered component or kit, EO revision, part numbers, vehicle makes, model years, engine families or test groups, engine sizes, and any attached application exhibit. Compare those fields with the installed part markings and the exact vehicle. A brand selling one exempt intake does not make its other intakes exempt, and coverage for one model-year range cannot be assumed to carry into a later calibration or engine family.
Then read the conditions. An order may require installation according to supplied instructions, prohibit changes to the described design, retain factory catalysts and sensors, preserve stock ECU calibration, or restrict advertising claims and component-by-component sales. A covered physical part paired with an unlisted tune, substituted housing, missing insert, modified calibration, or application outside the exhibit is not automatically the configuration CARB evaluated.
Preserve a verification file for the installed vehicle
Save the EO PDF and every referenced exhibit, the product label, invoice, exact part and serial numbers, installation instructions, photographs of identifying marks, and the vehicle VIN, model year, engine, and emissions label. CARB says EO numbers can be checked by Smog Check stations, BAR Referee stations, or CARB. Keeping the evidence with the vehicle makes inspection, resale, repair, and later application checks much easier than relying on a dead product page.
Recheck the current databases before purchase and installation because applications and documents can be revised. Also check EPA rules and the laws and inspection requirements that apply where the vehicle is registered and used. EPA’s published 2020 tampering enforcement policy treats an applicable CARB exemption as one form of reasonable-basis evidence. An enforcement policy is not a product approval or a replacement for applicable law: it does not turn an out-of-scope installation into a covered one or make the EO an EPA product endorsement. Confirm current agency guidance for decisions that depend on federal enforcement policy.
A cold-air-intake EO may list one housing and filter kit for particular BMW model years and state that no ECU calibration changes are made. Installing a visually similar unlisted part number on a newer engine—or pairing the listed kit with a tune—does not inherit that EO merely because the brand and product family look the same.
Illustrative example, not a measured vehicle test.
A repeatable workflow
- Get the EO number from the part label or manufacturer, then retrieve the current order and every exhibit directly from CARB.
- Match manufacturer, device, EO revision, exact part number, model year, engine or test group, and vehicle configuration.
- Read every installation, retained-equipment, calibration, labeling, marketing, and combination condition in the order and instructions.
- Save the EO, exhibits, label, invoice, part markings, installation record, vehicle identity, and current federal and local compliance checks.
Where the shortcut breaks
This guide is educational, not legal advice or a compliance determination. EO status, installation facts, registration jurisdiction, federal requirements, inspection rules, warranties, and product revisions must be checked for the exact vehicle and date.
Sources and update method
TunerBench prefers government, standards-body, and component-manufacturer documentation. This guide is reviewed against the sources below and should be revisited when regulations, product data, or vehicle technology changes.
- California Air Resources Board: Aftermarket, Performance, and Add-on Parts program
- California Air Resources Board: official aftermarket-parts Executive Order database
- California Air Resources Board: exemption process for manufacturers of aftermarket parts
- California Air Resources Board: an Executive Order applies to a specific program and use
- U.S. EPA: vehicle and engine tampering and aftermarket defeat-device policy